5.14.4 【Save/Recall >】
Accesses the menu to save/recall the screenshot, trace data,
IAStrace data or user state.
5.14.4.1 [Save >]
Save screen shots, trace data, or user status.
⚫[Screen Pixmap >]
Enter screenshot save submenu, you can choose to save
screenshots to local memory or USB disk, the image file format is
PNG. The file name is automatically created using the current date
and time.
When [Save to USB] is selected, the screenshot will be saved in a
folder named spectrum (created automatically) in USB disk.
⚫[Trace Data >]
Enter the trace data save soft menu, you can choose to save the
trace data to the local or flash memory, trace data file format is csv,
the trace data saved successfully is displayed on the screen.
⚫[User State >]
Save the current system setting as a user self-defined setting to
local memory. The user setting file can be used as the power-on
setting or preset setting.
⚫[Limit Line]
Save the limit line file. The save location is local. The limit line file
format is sp. The progress box (pop-up window) in the middle of
the screen displays information about saving the limit line.
Note: Save limit line can only be loaded when area measurement
is enabled (Measure →Pass-Fail > → Area Measurement >).
5.14.4.2 [Recall >]
To Next Page
Loading...
