Select Traces to view relevant information by name, by time, and
by size as desired.
⚫[First Page ]
Go to the first page of current directory.
⚫[Prev Page]
Go to the previous page.
⚫[Next Page]
Go to the next page.
⚫[Last Page]
Go to the last page.
⚫[Load >]
Recall the selected file.
⚫[Return]
Return the upper-level menu.
5.17.7【Meas Setup >】
Measurement setting menu for the corresponding measurement
parameter settings when adjacent channel power, channel power,
occupied bandwidth measurement mode is turned on.
5.17.7.1 [Channel BW]
Set the bandwidth of the channel power measurement, and set the
total display power percentage of bandwidth.
5.17.7.2 [Channel Interval]
Set the center frequency difference of the primary channel to the
adjacent channel.
5.17.7.3 [Channel Nums]
Set the number of upper and lower adjacent channels measured
by adjacent channel power.
5.17.7.4 [Power Percent]
Set the power ratio of occupied bandwidth.
To Next Page
Loading...
