Owon HSA1000 Series - Page 87

6.Specification
81
Distortion
Second harmonic cut-off point
Second harmonic
cut-off point（SHI）
fc ≥ 50 MHz，input signal level is -20 dBm，
attenuator is 10 dB
＞ +45 dBm
Third order intermodulation cut-off point
Third order
intermodulation cut-off
point（TOI）
fc ≥ 50 MHz，two magnitudes are -20 dBm，
frequency interval 200 kHz Two-tone signal
input mixer，attenuator is 0 dB
＞ +14 dBm（Typical）
1dB Gain compression
Input the 1dB
compression point of
the mixer（P1dB）
fc ≥ 50 MHz，attenuator is 0 dB
＞ -2dBm（nominal）