121
Instruments and controls
Mute
The output sound of the TNR is automatically muted in three situations:
– When the Forward Collision Warning is active, a buzzer inside the DIP is activated.
See section 'Forward Collision Warning' in the chapter 'Driver assist systems'.
– When the Lane Departure Warning System is active; the sound of the LDWS is
produced via the speakers of the audio system.
See section 'Lane Departure Warning System' in the chapter 'Driver assist
systems'.
– When the telephone is operated, the sound of the telephone is routed through the
speakers of the telephone interface system.
See section 'Operating the telephone' in the chapter 'Instruments and controls'.
Navigation
The TNR contains a navigation system. This system can be controlled via the TNR
controls.
For operating the navigation system, see the TNR manual.
WARNING! It is not allowed to operate the navigation while the vehicle
is in motion. This can result in a distraction from the road and traffic
conditions.
It is possible to lose control of the vehicle combination.
To set the navigation, STOP the vehicle at a safe place.
It is possible to set some vehicle parameters in the TNR. The TNR navigates the
vehicle so that it can reach its destination without any narrow streets or other traffic
difficulties.
These parameters are:
– Vehicle (combination) width.
– Vehicle (combination) length.
– Vehicle (combination) height.
– Vehicle (combination) weight.
– Transportation of dangerous goods (ADR).
Display
Display illumination
The TNR display and controls are illuminated for night-time viewing.
Dimming the vehicle interior lights also dims the lights of the TNR display and controls.
Information on the master display
It is possible to see some of the TNR features such as:
– TNR station information.
– Volume adjustment.
DW63246305.book Page 121 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
