55
Instruments and controls
Mirror control
Mirror adjustment
The electronically controlled mirrors can be adjusted as follows:
1. use the selection switches (2, 3, 4 or 5) to select a mirror.
2. use switch (1) to adjust the mirror in the correct position.
Mirror heating
Switch (6) is to switch the heating of the external mirrors on and off. The kerb mirror
and front view mirror are not heated. The mirror heater is switched on when the
indicator light (7) in the switch is on.
When the ignition is switched off, the mirror heater is switched off as well.
3.1.9 Interior lighting
Introduction
Activate the various interior lights by using the switch in the centre console or on the
bunk console (2).
All interior lighting works independently from the position of the ignition switch.
CAUTION:
– Switch off the interior lighting when parking the vehicle for longer.
The interior lighting uses power from the batteries. If this lasts for
a long time, it can result in low battery capacity and starting
difficulties.
The interior lighting on/off switch on the instrument panel can be used to
extinguish almost all of the interior lighting in the cabin.
Exceptions are; the snake light, the upper bunk lamp and the lights under
the roof console.
NOTE: With this switch in the 'off' position the interior lighting remains off
even when a door is opened.
The background lights of the switches remain on.
Interior Light Switch (ILS)
The switch is located on the centre console of the dashboard.
The interior light switch is also called a 'mood' switch. By selecting a mood, a group of
interior lights is selected and the corresponding icon is illuminated (green) on the
switch.
DW63246305.book Page 55 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
