56
Instruments and controls
1 Rotary switch
To select a mood, rotate the ring
clockwise and rotate
anticlockwise to switch off all
interior lights.
2 All interior lights off
3 Night
Coloured soft indirect lighting of
the cabin ceiling and floor for
night driving.
4 Relax
Interior lights on with reduced
intensity.
5Flood
Interior lights on, on full
intensity.
6 & 7 Using the buttons (+/-) the light
intensity of the selected mood
(excluding 'flood') can be
changed.
NOTE: The settings are saved and are recalled when the mood is
reselected (also after ignition off).
Interior lights control on the bunk console
Switch (2) is used to toggle between the
interior light moods 'Night' and 'Relax'
or to switch off the interior lights.
Exceptions are the snake light, the
upper bunk lamp and the lights under
the roof console which are not switched
off using switch (2).
With multiple pushes on
the upper part of the
switch, the interior lights
can be activated and can
be toggled between the
interior light moods
'Night' and 'Relax'.
At any time, the interior
lights can be switched off
by pushing on '0'.
D005153
3
2 1 7 6
4
5
D005128
1
2
DW63246305.book Page 56 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
