132
Instruments and controls
– Select the set temperature by turning the rotary switch (2) and confirm by pushing
soft key (14).
– The timer is set and the Climate Control Panel switched off.
NOTE: To check if the timer is switched on, push key (3) to activate the
Climate Control Panel. If the symbol (H) is displayed, the timer is set. Push
key (9) to deactivate the Climate Control Panel.
Make sure that the Climate Control Panel is switched off to prevent the 'Park
ventilation' function draining the batteries.
Deactivating the timer setting
– To deactivate the timer, the ignition key must be in the accessory position.
– Switch on the timer function by operating soft key (4) on the Climate Control Panel
(CCP).
– The CCP is now activated.
– Switch the timer from ON to OFF by turning the rotary switch (2).
– Confirm the selection by pushing soft key (14).
– Push key (9) to switch off the Climate Control Panel.
NOTE: If, after the auxiliary heater key (11) is operated, the green indicator
does not stay on, the auxiliary heater is in the so called 'Locked' state.
The auxiliary heater switches to the 'Locked' state after threeunsuccessful
attempts to start using the key (11). A reset is not possible, have the auxiliary
heater checked by a DAF Service dealer.
3.7.2 Cylinder block heater
The cylinder block heater is an auxiliary electrical heater element mounted in the
engine. Once connected to an earthed 230 VAC socket, it preheats the engine coolant.
For connection to the 230 VAC an extension cord is delivered as part of the installation.
The truck-mounted socket is placed in the steps on the driver side.
DW63246305.book Page 132 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
