133
Instruments and controls
WARNING! If exposed, 230 VAC is a hazardous voltage and contact
causes serious injury or even death.
Regularly check the cable and plug for damage and replace them
immediately if damage is found. Do not connect the cylinder block
heater with the electrical grid until the damaged component is
replaced.
WARNING! Never use the cylinder block heater when the coolant level
is too low. This results in damage to the heater element and can lead
to personal injury.
CAUTION: Never run the engine while the cylinder block heater is in
operation. This shortens the heater's lifetime.
NOTE: The connector is connected to the 230 VAC electrical grid using a
three-core (at least 3 x 1.5 mm2) earthed extension cord.
The extension cord's outer jacket and plug is made of an oil-resistant
moisture-proof thermoplastic material.
The extension cord is connected to an earthed wall socket which is provided
with a 30 mA. earth leakage circuit breaker.
DW63246305.book Page 133 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
