54
Instruments and controls
Control panel in co-driver's door
10 Right window control switch
Window control
The door windows can only be operated when the ignition is on. If a window has been
left open by mistake, or in case of an emergency, it is still possible to close or open a
door window for a short period after the ignition has been switched off.
Opening and closing a door window
– To open a door window fully (express down), press the bottom of a control switch
(8, 9 or 10) for a short period (approximately 0.5 seconds).
– To close a door window fully (express up), press the top of a control switch (8, 9 or
10) for a short period (approximately 0.5 seconds).
– To stop a moving door window, press the control switch in the opposite direction
before completing the operation.
– To open or close a door window partly, press and hold the bottom of a control switch
(8, 9 or 10). Releasing the control switch stops the door window from moving.
Anti-pinch protection
The window also stops moving when the anti-pinch protection is active. When blocked
by an object, the direction of movement is reversed and the window goes partially
down.
If the anti-pinch protection was active, the express-up and express-down functions may
be deactivated. To reactivate this function, close the window fully without making an
intermediate stop, by continuously pressing the top of a control switch (8, 9 or 10).
DW63246305.book Page 54 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
