139
Master display
After all the pop-ups have been displayed, the master display automatically switches
to the warning list in the service info menu.
If there are red as well as yellow pop-ups, a red hazard warning triangle is displayed in
the top right-hand corner of the master display.
NOTE: When there are more warnings than fit the display, this is indicated
by arrows on the right side of the display. The warnings are displayed in
order of priority. This means that the most important warning is displayed
first.
Turning the Menu Control Switch (MCS) brings up the hidden ones. An
arrow with a line attached to it indicates the beginning or end of the list.
NOTE: A red warning cannot be removed from the screen when the engine
is running.
The red warnings can be suppressed by pressing the Menu Control Switch
when the engine is not running. This allows selection of other menu options.
The warning always reappears after returning to the main screen.
A continuous acoustic signal accompanies a red warning.
NOTE: Yellow warnings can be suppressed at any time.
A pulsating acoustic signal accompanies a yellow warning and sounds four
times.
The red hazard warning triangle in the top right-hand corner of the master display
remains active at all times.
NOTE: If the safety belt or safety belts are not fastened after the engine has
been started, the red warning indicator 'Fasten safety belt' comes on. At the
same time a grey pop-up screen is displayed. Both of them disappear as
soon as the safety belt or safety belts are fastened. They reappear when a
safety belt is loosened while the engine is still running.
If the warning is ignored, the pop-up disappears but the warning indicator
remains on.
NOTE: The vehicle is equipped with a park brake warning system. If the
driver's door is opened while the engine is switched off and the park brake
is not applied, an acoustic signal is given and a warning symbol is shown on
the instrument panel.
DW63246305.book Page 139 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
