154
Master display
This warning is activated if:
– the PTO is not active within a defined time after the PTO 'switch on'
command is received (by the PTO control switch or another request)
and all the 'switch on' conditions are fulfilled, or
– the PTO was active and is switched off based on the PTO status
switch or the PTO 'switch off' conditions while the PTO operation
switch is in the 'on' position.
Brake lining wear truck
This symbol lights up if the brake pad on one or more wheels is worn.
Vehicle Stability Control
Fault in VSC (Vehicle Stability Control)
This warning symbol may relate to the following text descriptions:
1. Grid heater active.
2. Grid heater system.
Airbag warning
See section 'Airbag safety instructions' in the chapter 'Warnings and
safety regulations'.
Fasten safety belt
This warning symbol may relate to the following text descriptions:
1. Body warning.
2. Pressure failure.
3. Oil temperature.
4. Body unlocked.
Body Builder Module malfunction.
Text depends on vehicle configuration.
This warning symbol may relate to the following text descriptions:
1. Hill Start Aid active.
2. Brake release.
See section 'Hill Start Aid' in the chapter 'Driver assist systems'
DW63246305.book Page 154 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
