200
Driving
– Load.
– Engine conditions (cold or warm).
CAUTION: The use of incorrect or contaminated AdBlue can lead to
serious damage to the Emission Aftertreatment System (EAS).
– Only use the specified AdBlue. See section 'AdBlue' in the chapter
'Technical data'.
– Clean the vicinity of the AdBlue tank opening before opening it and
filling up the tank.
– Take care that nothing except clean AdBlue can enter the tank.
The tank opening for AdBlue is on the
AdBlue tank, the filler cap for AdBlue
has a blue colour. Having refuelled
diesel, also fill up the AdBlue tank with
AdBlue.
Insert the dedicated AdBlue filler gun
fully into the neck of the tank so that the
magnet in the neck releases the AdBlue
delivery. Filling up the AdBlue tank
using a dedicated filler gun results in a
maximum fill volume of 80%.
Under certain conditions during light-duty operation, little or no AdBlue may be used.
In the absence of a warning symbol, it can be assumed that the system functions
correctly.
NOTE: There remains a small quantity of AdBlue in the AdBlue tank, even
if the level gauge indicates that it is empty.
Any spilled AdBlue can simply be removed with clean water. Dried AdBlue
leaves a white deposit which can be removed with clean water as well.
NOTE: Not using AdBlue according to the vehicle's specifications can
invalidate the manufacturer's warranty.
DW63246305.book Page 200 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
