206
Driving
– Pull the park brake handle down as
far as possible (position (1) normal
parking position). Press the park
brake handle in (2) and pull it further
down (3) (the test position: the
brakes of the trailer are now
released) and check if the vehicle
combination remains in position.
– Put wheel chocks in front of and
behind the wheels of the driven
axle.
– Angle the front wheels so that the
vehicle does not move into the
traffic stream if it is accidentally set
in motion.
NOTE: The vehicle is equipped with a park brake warning system. If the
driver's door is opened while the engine has been switched off and the park
brake has not been applied, an acoustic signal is given and a warning
symbol is shown on the instrument panel.
Shifting the gearbox to neutral
Vehicle with an automated gearbox
Turn the rotary knob to neutral (N).
Vehicle with automatic gearbox
Select neutral (N) on the gearbox selector.
D001816
1
2
3
D005138
DW63246305.book Page 206 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
