212
Driving
Master display notifications
If the soot level in the DPF exceeds a
certain level, the master display shows
notifications indicating that the DPF
must be regenerated. As an example,
the picture shows the screens of the
first notification.
Warning symbols light up along with
these notifications. The first three
notifications are suppressed using the
MCS. The warning symbols stay on
after a notification is suppressed.
Soot level high. Regeneration required.
First notification that a forced stationary regeneration is required.
A yellow pop-up screen showing the DPF warning symbol and the text
'Soot level high' is shown on the master display. This pop-up screen is
followed by a post-warning indication showing the actual soot level with
the text 'Regeneration required'.
Change your driving route, preferably to motorway driving, so that the
vehicle can conduct an active regeneration, or initiate a forced stationary
regeneration as soon as circumstances allow it. Follow the instructions
described in section 'Initiating a forced stationary regeneration'.
Soot level too high. Start regeneration immediately.
Second notification that a forced stationary regeneration is urgently
required.
A yellow pop-up screen showing the DPF warning symbol and the text
'Soot level too high' is shown on the master display. This pop-up screen
is followed by a post-warning indication showing the actual soot level
with the text 'Start regeneration immediately'.
Soot filter
FULL
CLEAN
Regeneration
required
Soot level high
DW63246305.book Page 212 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
