226
Driving
Cruise control is set using the steering wheel switches. See section 'Steering wheel
switches' in chapter 'Instruments and controls'.
NOTE: Altering the cruise control speed using the steering wheel switches
will not work as long as the accelerator pedal is operated.
Accelerator pedal function during cruise control
When the cruise control is active, the vehicle speed can be increased using the
accelerator pedal. When the accelerator pedal is released, the vehicle speed returns
to the last valid cruise control speed.
When the vehicle speed is increased with the accelerator pedal above the cruise speed
for longer than 3 minutes, the cruise control function is disengaged.
Disengaging the cruise control
Press switch (4) to disengage the cruise control. The set speed is no longer shown in
the speedometer display.
NOTE: Cruise control does not deactivate when the downhill speed control
is active.
Re-engaging the cruise control (resume)
When the cruise control is disengaged, press switch (2) to re-engage the cruise control.
If the engaging conditions are met, the cruise control is re-engaged at the last set
speed. If the current vehicle speed is less than the last set speed, the vehicle
accelerates to the programmed set speed.
NOTE: When re-engaging the cruise control bring the vehicle back to
cruising speed using the accelerator pedal first before pressing switch (2).
D005102
1
3
5
2
4
6
DW63246305.book Page 226 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
