EasyManua.ls Logo

Paccar DAF CF - 7.16 Engine brake

Paccar DAF CF
375 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
230
7
Driving
NOTE: Via an optional setting (made by a DAF Service dealer) on vehicles
with air suspension it is possible that operating the PTO switch lowers the
air suspension on to its bump stop.
With the vehicle on its bump stop the remote control is switched off.
If the PTO is switched of the remote control becomes active again and the
vehicle can be brought back on driving height. See section 'Remote control'
in the chapter 'Air suspension'.
Gearbox PTO
Switching on the PTO
Depending on the programming, the park brake must either be in the parking
position or in the driving position.
NOTE: If the park brake can be in the driving position when the PTO is
switched on, it is possible to drive.
To switch on the PTO the vehicle must be stationary.
Allow the engine to run at idling speed.
With a manual gearbox, hold the clutch pedal down for another 2-3 seconds (to
engage the PTO).
With an automated gearbox, turn the rotary switch to neutral (N).
Switch on the PTO with the PTO switch.
The PTO warning indicator is activated on the instrument panel when the PTO is
engaged.
Switching off the PTO
The vehicle must be stationary.
Run the engine at idling speed.
With a manual gearbox, press the clutch pedal.
With an automated gearbox, turn the rotary switch to neutral (N).
Switch off the PTO with the PTO switch.
With a manual gearbox, hold the clutch pedal down for another 2-3 seconds (to stop
the PTO).
The PTO warning indicator is deactivated on the instrument panel when the PTO is
disengaged.
Driving with the PTO engaged
Driving with the PTO switched on is permitted, provided the maximum PTO speed is
not exceeded.
Changing gear when the PTO is engaged is not permitted and, in the case of an
automated gearbox, is not possible.
Engine PTO
Switching on the PTO
Allow the engine to run at 650 rpm - 1000 rpm.
When driving, the vehicle speed must be less than 50 km/h (31 mph).
Switch on the PTO with the PTO switch.
The PTO warning indicator is activated on the instrument panel when the PTO is
engaged.
DW63246305.book Page 230 Friday, March 22, 2019 4:54 PM

Table of Contents

Related product manuals