244
Driver assist systems
The 'Distance sensor dirty' warning is activated when the sensor cover and/or sensor
is too dirty to operate properly or blocked. ACC and/or AEBS can no longer be
engaged. Clean the sensor cover or remove the blockage if this warning is active.
Consult a DAF Service dealer if the warning remains after cleaning or removing of the
blockage.
NOTE: If, for a longer period of time, the sensor is monotoring very few or
no objects on and beside the road in front of the vehicle it can occur that his
warning is displayed.
Traffic situations
CAUTION: There are a number of traffic situations in which the AEBS/
ACC sensor cannot conclusively determine objects. These traffic
situations may lead to system reactions from ACC or AEBS that are
unexpected, unnecessary or even 'too' late.
Below a number of these traffic situations are depicted.
Bends
At bends, as well as before and after bends, it can be difficult for the AEBS/ACC sensor
to identify objects ahead. The vehicle may brake unexpectedly or 'too' late.
D001697-2
DW63246305.book Page 244 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
