249
Driver assist systems
Control panel
1 Camera selection key
2 Monitor screen on/off key
3 Menu enter or exit key
4 Escape or back key
5 Scroll down/- key
6 Scroll up/+ key
7 OK/Confirm key
Camera selection
With the camera selection key (1), it is possible to switch between the connected
cameras. The LED next to the camera selection key shows which camera is displayed
on the monitor screen.
Monitor screen on/off
By pressing the monitor screen on/off key (2), the screen can be switched on or off.
When the screen is off, an LED lights up next to the monitor screen on/off key.
Under certain circumstances, the monitor screen is automatically activated and cannot
be switched off.
When a front camera is mounted, the monitor screen with front view is automatically
activated when:
– Vehicle speed is less than 30 km/h.
– the front camera is activated using the camera selection key.
When a side camera is mounted, the monitor screen with side view is automatically
activated when:
– the direction indicator on the co-driver side is activated.
– the side camera is activated using the camera selection key
NOTE: Some of these conditions are mandatory in some countries.
User menu
The menu can only be activated when the vehicle is at a standstill and the park brake
or the brake pedal is applied. When the menu is accessible, an LED indicator next to
the menu enter or exit key (3) lights up.
By pressing the menu enter or exit key, the on-screen main menu appears. Pressing
the menu enter or exit key again exits the main menu.
With the main menu active, a sub menu can be selected by scrolling up or down (keys
5 and 6). The menu can be entered by pressing the OK/Confirm key (7).
With the escape key (4), it is possible to go back one level.
D001672
1
2
3
7654321
DW63246305.book Page 249 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
