309
Air suspension
Basic remote control
1 'ON/OFF' and 'STOP' key. See
section 'Stop key'.
2 Automatic setting of normal
driving height.
3 Lifting of chassis while the key is
pressed.
4 Lowering of chassis while the
key is pressed.
NOTE: The remote control is (de-) activated by a long press on the 'STOP'
key.
After the ignition is switched off, the remote control is always deactivated.
The stop function is always active regardless of the remote control being
activated or not.
Extended remote control
1 Front axle of truck selected.
2 Rear axle of truck selected.
3 Truck trailing axle selected.
4 LED's indicating that the
corresponding function is
activated.
5 Front axle of trailer selected
6 Rear axle of trailer selected.
7 Trailer trailing axle selected.
8 'STOP' key. See section 'Stop
key'.
9, 10, 12 and 13Lifting the chassis to a
pre-set height. See section
'Setting memory keys (M keys)'.
11 Automatic setting of normal
driving height.
14 Lifting (top part) or lowering
(bottom part) the selected axles
when the key is pressed.
NOTE: If one of the keys 1 till 6 is operated, a green indicator light comes
on above the key operated.
D005113-2
5
6
7
8
4
9
1012
11
13
14
3
2
1
4
DW63246305.book Page 309 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
