356
Technical data and identification
– L - 120 km/h
– M - 130 km/h
Checking the tyre pressures
Tyre pressures depend on axle load and tyre type. The tyre type can be identified from
the tyre indication on the side of the tyre.
Tyre pressure table
– The axle loads and corresponding tyre pressures shown in the table apply to normal
operating conditions. For all other cases, refer to the specifications of the tyre
manufacturer.
– The tables are divided into axle loads and wheel fittings:
– Single tyres, 2000 - 6000 kg
– Twin tyres, 2000 - 6000 kg
– Single tyres, 6500 - 13000 kg
– Twin tyres, 6500 - 13000 kg
– The tyre pressures shown in the table apply to cold tyres.
– Unnecessary tyre wear is frequently caused by vehicle operation with tyre
pressures that do not match the axle load.
– For twin wheel fitting:
– both tyres must be inflated to the same pressure;
– the tread depth must be practically the same on both tyres.
DW63246305.book Page 356 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
