37
Theft protection systems
If the LED is off (A), the vehicle may be
started.
If the LED flashes slowly (B), the alarm
system is active.
If the LED flashes quickly (C), a self-test
is carried out or an error message is
given with a flashing code.
NOTE: After the alarm is
switched on the LED flashes
quickly (C) for about 50
seconds. After that period
the LED flashes slowly (B).
If the system raised an alarm, the cause can be determined via the system LED by
reading the flashing code (C).
This indication is displayed for 30 seconds after the system has been deactivated with
button (2) of the ignition key.
A
B
C
Flashing code Circuit
3 Driver's door detection
4 Cabin approximation switch detection (cabin lock)
5 Power supply after ignition
6 Superstructure and trailer cargo space detection
8 Superstructure and trailer cargo space detection
9 Interrupted wire
10 Co-driver's door detection
11 Radar sensor cabin interior detection
DW63246305.book Page 37 Friday, March 22, 2019 4:54 PM
To Next Page
Loading...
