Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 87OM5029_GB
Stabilizers on the ground microswitches (Fig. 5.13)
The head of the microswitch must be free when the stabilizer is on the ground and and
it must be pressed when the stabilizer is lifted.
Stabilizers position microswitches (Fig. 5.14)
The head of the microswitch must be free when the stabilizer is in the large position and
it must be pressed when the stabilizer is in the narrow position.
Stabilizers pins microswitches (Fig. 5.15A, 5.15B)
The head of the microswitch must be free when the pin is in, and it must be pressed
when the pinis out.
Fig. 5.15A
Fig. 5.13 Fig. 5.14
Fig. 5.15B
To Next Page
Loading...