Palm V User Manual

Page 150 Advanced HotSync® Operations
To check the ports used for infrared communication:
1. In the Windows taskbar, click Start, choose Settings, and then
choose Control Panel.
2. Double-click Infrared.
3. Click the Options tab.
4. Select Enable infrared communication.
The COM port displayed in the drop-down box is the port
where your infrared device is attached. It should be
different
from any port used by the HotSync Manager.
5. Make a note of which port is listed as “providing application
support.” You need this information to configure the HotSync
Manager for infrared communication.
This port (COM4 in this example) is the simulated port, the
channel through which the actual infrared communication
takes place between your computer and your handheld.
6. Deselect any other check boxes in the Options tab.
7. Click Apply and OK.

Palm V Specifications

General

Display	Monochrome LCD
Resolution	160 x 160 pixels
RAM	2 MB
Storage	2 MB
Battery	Rechargeable lithium-ion
Operating System	Palm OS 3.1
Manufacturer	Palm, Inc.
Release Date	1999
Processor	Motorola DragonBall EZ MC68EZ328 (16 MHz)
Weight	113 grams
Input	Stylus
Connectivity	Serial port