Page 210 Frequently Asked Questions
Beaming problems
Recharging problems
Problem Solution
I cannot beam data to
another Palm OS
handheld.
■
Confirm that your handheld and the
other Palm V handheld are between ten
centimeters (approximately 4") and one
meter (approximately 39") apart, and
that the path between the two
handhelds is clear of obstacles. Beaming
distance to other Palm OS handhelds
may be different.
■
Move your handheld closer to the
receiving handheld.
When someone
beams data to my
handheld, I get a
message telling me it
is out of memory.
■
Your handheld requires at least twice
the amount of memory available as the
data you are receiving. For example, if
you are receiving a 30K application, you
must have at least 60K free.
■
Perform a soft reset. See “Performing a
soft reset” in Appendix A for more
information.
Problem Solution
When I place my
Palm V handheld in
the cradle, the cradle
light does not go on.
■
Confirm that your handheld is well
seated in the cradle.
■
Confirm that your recharger cable is
properly connected to the back of the
cradle’s serial (COM) port connector
that plugs into your computer.
■
Confirm that your recharger is plugged
into an AC outlet that has power.
To Next Page
Loading...
Need help?
General
