Palm V User Manual

Chapter 7 Page 171
System, alarm, and game sounds
Your handheld uses a variety of sounds. The System, Alarm, and
Game Sound settings enable you to turn the sounds on or off, and to
adjust the volume level.
To set the system and alarm sounds:
1. Tap the System Sound pick list and select the sound level.
Note:
When you turn off the System Sounds, you also turn off
the “chime” tones associated with the HotSync operation.
2. Tap the Alarm Sound pick list and select the sound level.
3. Tap the Game Sound pick list and select the sound level.
Note:
The Game Sound setting works only with games that are
programmed to respond to this setting. Older games
typically do not respond to this setting.
Beam Receive
You can choose to turn off the Beam Receive feature. This prohibits
anyone from beaming information to your handheld. It also results in
a slight saving of battery power.
To change the Beam Receive setting:
■
Tap the Beam Receive pick list and select On or Off.

Palm V Specifications

General

Display	Monochrome LCD
Resolution	160 x 160 pixels
RAM	2 MB
Storage	2 MB
Battery	Rechargeable lithium-ion
Operating System	Palm OS 3.1
Manufacturer	Palm, Inc.
Release Date	1999
Processor	Motorola DragonBall EZ MC68EZ328 (16 MHz)
Weight	113 grams
Input	Stylus
Connectivity	Serial port