Chapter 1 Page 9
Locating back panel components
Side channels
Hold the stylus or front cover, which slide in and
out of either side channel and click into place. To
use the stylus, remove it from the side channel
and hold it as you would a pen or pencil.
IR port
Uses infrared technology to transmit data to and
receive data from other Palm OS handhelds, and
to perform HotSync operations. See “Beaming
information” in Chapter 5 and “IR HotSync
operations” in Chapter 6 for more information.
Reset button
Under normal use, you should not have to use
the reset button. See Appendix A for information
about when and how to use the reset button.
Reset
button
Serial
connector
Side channel
for stylus or
cover
IR
port
To Next Page
Loading...
