Panasonic AG-CX350

The AG-CX350 Book: Preparation before recording
20
2-5-2. Assignable functions (Continued)
( ) : Features that turn OFF when switch off the unit.
Menu item
Description
LEVEL GAUGE
Display a level gauge on the viewfinder for the horizontal and vertical
axes. Inclinations can be indicated up to approx. 30 degrees in the
horizontal, and the vertical directions.
LEVEL GAUGE SET
Set the current angle as level gauge reference.
LOAD SETUP FILE
Recall set up file (setting data) from an SD memory card.
MENU
Open MENU.
O.I.S.
Turn ON/OFF the optical image stabilizer.
O.I.S. mode
OIS characteristic customization. (NORMAL, PAN/TILT, STABLE)
ONE PUSH AF
Focus mode becomes AUTO while keep pressing the USER button.
( ) PEAKING
Turn ON/OFF peaking and square focus assist function.
PRE REC
Turn ON/OFF the pre-record mode. This mode allows the camera to
start recording video and audio from approx. 3 to 10 sec before the
REC/PAUSE button is pressed.
REC CHECK
Plays last 3 sec of the last recorded clip on the SD memory card.
( ) S.GAIN
Turn ON/OFF super gain function that allows boosting image gain 24dB
or higher.
SLOT SEL
Switch memory card slots for recording/playing back.
( ) SPOTLIGHT
Switch auto iris mode to Spotlight mode. The spotlight mode optimizes
iris control behavior when the contrast around the subject is high
(example: the subject is a spot light etc.)
( ) STREAMING
START
Start/stop video streaming distribution from the AG-CX350.
SUPER SLOW
Turn ON/OFF super slow record mode.
( ) VF ON/OFF
Turn ON/OFF the EVF display.
VFR
Enable/disable variable frame rate record function.
( ) WFM
Display the Waveform or Vector scope on the built-in LCD monitor.
Set MENU > VIDEO OUT/LCD/VF > EI ASSIST > WFM mode to select
the item (Waveform or Vector scope).
( ) Y GET
Turn ON/OFF the spot meter function.
ZEBRA
Turn ON/OFF the ZEBRA indicator.