The AG-CX350 Book: MENU operation
[SCENE FILE] MENU
3-1-25. MASTER PED
Value (Factory default
underlined)
Adjust master black level
3-1-26. RGB BLACK CONTROL SETTING
Adjust master level of Red channel
Adjust master level of Green channel
Adjust master level of Blue channel
Determine whether to apply adjustment
result of R, G and B PED controls as
pedestal level offset after Auto Black
Balance (ABB) is performed.
ON: Apply
OFF: Not applied (pedestal
levels of R,G,B PED become
zero)
Choose image contrast and gradation
according to the scene.
HD, SD, FILMLIKE1,
FILMLIKE2, FILMLIKE3,
FILM-REC, VIDEO-REC, HLG
See P.81 for details on how each
gamma mode effects the overall
look of the image
Adjust gamma characteristic in
units of 0.01.
Set dynamic range when
FILM-REC item in GAMMA MODE
SEL is selected.
200% - 600% (in units of 100%)
Set black stretch level when
FILM-REC item in GAMMA MODE
SEL is selected.
Adjusts slope angle when in
VIDEO-REC mode.
150% - 500% (in units of 50%)
Sets the signal level where video
image compression starts to be
applied in VIDEO-REC mode.
Adjusts gamma characteristics in
darker signal areas. (lifts darker
areas when value is increased)
Set upper limit of signal
compression/expansion for BLACK
GAMMA item.
1: Approx. 20%
2: Approx. 30%
3: Approx. 40%