Panasonic AG-CX350

The AG-CX350 Book: MENU operation
28
[SCENE FILE] MENU
3-1-14. SKIN TONE DTL A, B, C
Menu item
Description
Value (Factory default
underlined)
SKIN TONE DTL
A, B, C
Adjust level of softness effect for a certain
color tone ( e.g. flesh tone).
ON, OFF
3-1-15. SKIN TONE ZEBRA
Menu item
Description
Value
SKIN TONE ZEBRA
Display ZEBRA pattern on the areas where
skin tone detail effect is active.
ON, OFF
3-1-16. SKIN TONE DTL SETTING
Menu item
Description
Value
DETECT TABLE
Select the skin color table of the object to
apply the skin tone table to.
A, B, C
SKIN DTL EFFECT
Set skin tone effect level.
0 – 16 - 31
I CENTER
Set the center position on the I axis (the
area to apply Skin Tone).
0 – 35 - 255
I WIDTH
Set the area width to apply Skin Tone
Detail along the I axis with [I CENTER] as
the center.
1 – 2 - 3
Q WIDTH
Set the area width to apply Skin Tone
Detail along the Q axis with [I CENTER] as
the center.
1 – 2 - 3
Q PHASE
Set the area phase to apply Skin Tone
Detail with the Q axis as a reference.
-128 – 0 - 127
R-Y
Q axis
I axis
B-Y/0°
255
Mg
R
255
0
YI
G
Cy
B
¯
+
[ I WIDTH ]
[ I CENTER]
[ Q WIDTH ]
[ Q PHASE]