Panasonic AG-CX350

The AG-CX350 Book: MENU operation
38
[VIDEO OUT/LCD/VF] MENU
3-1-42. HDMI OUT
Menu item
Description
Value (Factory default
underlined)
OUT FORMAT
Set output signal format on the HDMI OUT.
Selectable format types vary and depends
on other system settings. See
6-4. Output signals (HDMI) (P.88) for
details.
3840x2160,
3840x2160p (420/8bit),
1920x1080p,
1920x1080i, 1280x720p,
720x480p, 720x576p
HDMI TC OUT
Choose whether to superimpose timecode
on the HDMI OUT signal.
ON, OFF
HDMI REC
REMOTE (*2)
Enable recording remote via HDMI
terminal.
ON, OFF
HDMI CHAR
Show characters on the HDMI OUT.
ON, OFF
HDMI OUT ZEBRA
Show ZEBRA patterns on the HDMI OUT.
ON, OFF
HDMI OUT HDR
Set output image on the HDMI OUT.
SDR, HDR (*3)
HDMI OUT V-Log
Set output image on the HDMI OUT while
in V-Log mode.
V-Log, V-709
*2 Enabled while HDMI TC OUT item is set to ON, and disabled while MENU > RECORDING >
REC FUNCTION > REC MODE is set to INTERVAL.
*3 Fixed to “SDR” under following menu conditions.
MENU > SYSTEM > REC FORMAT > 480-59.94i/AVCHD SA
MENU > SYSTEM > REC FORMAT > 576-50.00i/AVCHD SA
MENU > VIDEO OUT/LCD/VF > HDMI OUT > OUT FORMAT > 720x480i
MENU > VIDEO OUT/LCD/VF > HDMI OUT > OUT FORMAT > 720x576i
Output image is fixed to “SDR” while MENU > SCENE FILE > GAMMA MODE SEL item is set to
anything other than HLG.
3-1-43. AV OUT
Available while MENU > VIDEO OUT/LCD/VF > VIDEO OUT SEL item is set to “AV+HDMI”.
Menu item
Description
Value
OUTPUT SW
Turn ON/OFF AV signal output.
ON, OFF
AV OUT CHAR
Show characters on the AV OUT.
ON, OFF
AV OUT ZEBRA
Show ZEBRA patterns on the AV OUT.
ON, OFF
Pin assignment of the AV OUT (described as plug side)
Audio (Left) : White
VIDEO: Yellow
Ground
Audio (Right) : Red