Panasonic AG-CX350

The AG-CX350 Book: MENU operation
27
[SCENE FILE] MENU
3-1-9. SYNC SCAN TYPE
Menu item
Description
Value (Factory default
underlined)
SYNC SCAN TYPE
Select display unit of synchro scan.
sec, deg
3-1-10. SYNC SCAN
Menu item
Description
Value
SYNC SCAN
Set speed of
the variable
shutter
(synchro scan)
which is
suitable to film
image on
display
devices.
SYSTEM FREQUENCY
59.94Hz
50.00Hz
SYNC
SCAN
sec
59.94i: 1/60.0–1/7200
59.94p: 1/60.0–1/7200
29.97p: 1/30.0–1/7200
23.98p: 1/24.0–1/7200
50i: 1/50.0 – 1/7200
50p: 1/50.0 – 1/7200
25p: 1/25.0 – 1/7200
SYNC
SCAN
deg
3.0d – 360.0d
Variable range of synchro scan
3-1-11. MASTER DTL
Menu item
Description
Value
MASTER DTL
Adjust image contour correction level for entire
image.
-31 – 0 - 31
3-1-12. DTL CORING
Menu item
Description
Value
DTL CORING
Adjust threshold level of image contour correction.
0 – 15 - 60
3-1-13. DETAIL SETTING
Menu item
Description
Value
DETAIL
Turn ON/OFF the image contour correction.
ON, OFF
V.DTL LEVEL
Adjust image contour correction level for vertical
detail.
-7 – 0 - 7
DTL FREQ.
Set the thickness of contour correction signal.
Image enhancement level becomes higher when
value is increased
-7 – 0 - 7
LEVEL
DEPEND.
Set the detail level of low-luminance areas (dark
areas).
-7 – 0 - 7
KNEE APE LVL
Set the detail level of high-luminance areas (very
bright areas).
-7 – 2 - 7
DTL GAIN（+）
Set the detail level in the positive (brightening)
direction separately.
-31 – 0 - 31
DTL GAIN（-）
Set the detail level in the negative (darkening)
direction separately.
-31 – 0 - 31