The AG-CX350 Book: MENU operation
[VIDEO OUT/LCD/VF] MENU
3-1-49. MARKER
Marker characters to be shown on the LCD and Viewfinder image can be set individually.
Value (Factory default underlined)
Set shape of center marker
Set the type of safety zone marker.
1:Boxed, 2:Corner only, OFF
Set the size of safety zone marker.
Set the type of frame marker.
4:3, 13:9, 14:9, 1.85:1, 2.35:1,
OFF
Set the color of frame marker.
WHITE, BLACK, RED, GREEN,
BLUE, YELLOW
Set focus assist mode when
FOCUS ASSIST button is pressed.
Set image expanding mode.
10SEC: Expand for 10 seconds
HOLD: Keep expanded until the
button pressed.
UNTIL REC: Expand until recording
starts
Set image magnifying size.
Set highlighting level of peaking
focus assist.
Set highlighting color of peaking
focus assist.
Turn ON/OFF monochrome focus
assist function.
ON, OFF,
DURING PEAKING: Remove color
from the image while
peaking/square focus assist function
is enabled.
Turn ON edge enhancement
feature on the viewfinder and
the built-in LCD monitor for easy
focusing.
Set enhancement level of the
EVF/LCD DETAIL setting.
Set enhancement frequency of the
EVF/LCD DETAIL setting.