Panasonic AG-CX350

The AG-CX350 Book: MENU operation
45
[RECORDING] MENU
3-1-58. TC/UB
Menu item
Description
Value (Factory default underlined)
TC PRESET
Set the timecode value.
---
UB PRESET
Set the users bit information.
00 – FF
FREE/REC RUN
Set the timecode count mode (*1)
FREE RUN, REC RUN
DF/NDF
Set the timecode drop frame
mode.
DF, NDF
UB MODE
Set information type, to be
recorded and output from SDI
OUT.
FRAME RATE
Frame rate information
USER
Information, set on SET UB menu
item
TIME
Hour, Minute, Second information
DATE
Year, Month, Day information
CLIP NAME
Clip name information
TC IN/OUT SEL
Set purpose of TC IN/OUT
terminal.
TC IN: Use as TC input terminal
TC OUT: Use as TC output terminal
TC OUT REF
Make value offset for the output
timecode.
RECORDING
Output timecode without delay.
SDI OUT
Output timecode with delay so that
the value meets timing with SDI OUT
image.
*1 Notes about the Timecode count mode
Fixed to “REC RUN” while the following menu items are set as follows.
- MENU > SCENE FILE > VFR > ON
- MENU > SYSTEM > SUPER SLOW > ON
- MENU > RECORDING > REC FUNCTION > REC MODE > INTERVAL
Fixed to “FREE RUN” while the following menu items are set as follows.
- MENU > RECORDING > PRE REC > ON
- MENU > RECORDING > 2SLOT FUNC. > BACKGR REC (Background record mode)
3-1-59. REC COUNTER
Menu item
Description
Value
REC COUNTER
Set the counting method of record
counter.
TOTAL: Cumulate until RESET
button is pressed
CLIP: Reset to zero at the start of
every clip recording
3-1-60. TIME STAMP
Menu item
Description
Value
TIME STAMP
Allows recording of superimposed
date and time on the image.
OFF, DATE, TIME, DATE&TIME
*TIME STAMP feature does not function while in V-Log mode (MENU > SYSTEM > COLOR).