The AG-CX350 Book: MENU operation
[NETWORK] MENU
3-1-67. WLAN PROPERTY
Settings of Wi-Fi connection. Available while MENU > NETWORK > DEVICE SEL item is set to
“WLAN”.
Value (Factory default underlined)
Display mac address
information of a connected
Wi-Fi adaptor.
DIRECT
Connect to Wi-Fi devices such as a
tablet computer without using a wireless
access point.
INFRA(SELECT)
Connect to a wireless access point.
Access point can be chosen from an
available access point list.
INFRA(MANUAL)
Connect to a wireless access point.
Access point can be searched by
entering an SSID manually.
Display network name of
the AG-CX350 unit.
Set connection type.
(available when TYPE item
is set to “DIRECT”)
Set Wi-Fi channel of
2.4GHz network.
Set Wi-Fi channel of 5GHz
network.
AUTO, CH36, CH40, CH44, CH48,
CH100, CH104, CH108, CH112, CH116,
CH132, CH136, CH140, CH149, CH153,
CH157, CH161, CH165
Set signal encryption
method for INFRA
connection.
WPA-TKIP, WPA-AES, WPA2-TKIP,
WPA2-AES, NONE
Factory default password:
(01234567890123456789abcdef)
Set the IP address
distribution method using
DHCP.
Factory default 192.168.0.1
Factory default 255.255.255.0
Factory default 192.168.0.254