Panasonic AG-CX350

The AG-CX350 Book: Understanding advanced features
67
Setting on tablet device (on Apple iPad for example)
1. Install the Panasonic CX ROP app from App Store.
2. Open “Setting” > Wi-Fi > “, and choose the SSID of the camera (example AG-CX350).
3. Enter connection password (factory default: 01234567890123456789abcdef) to connect the
AG-CX350 via Wi-Fi network.
4. Open the Panasonic CX ROP app on the iPad. Tap symbol and complete authentication
settings by entering "IP address, user ID (factory setting: guest), and password (factory setting:
cxguest) of the AG-CX350.
5. Confirm that the connection status of the AG-CX350 is shown as (ready to be controlled
from the app.).
6. Start operation from the app.
Setting example on the Panasonic CX ROP application for iPad
Connection status on the AG-CX350
No connection to the network.
Connected to the network but not connected to the CX ROP.
Connected to the CX ROP.