Using sport meter as Exposure Index (EI) assist
Adjusting EI with percent (%) display (example)
2. Set display unit of the spot meter function.
MENU > VIDEO OUT/LCD/VF > EI ASSIST > Y GET UNIT > %
3. Recall the function with one of the USER buttons.
4. Position the sampling box (displayed in center of the viewfinder image) over the subject to be
measured (18% gray reference for example).
5. Set the aperture, ISO, Frame rate (fps), and shutter so that the level shown on the spot meter
is 42% in “V-Log”.
Adjusting EI with STOP display (example)
1. Set display unit of the spot meter function with the menu item below.
MENU > VIDEO OUT/LCD/VF > EI ASSIST > Y GET UNIT > STOP
2. Recall the function with one of the USER buttons.
3. Position the sampling box (displayed in center of the viewfinder image) over the subject to be
measured (18% gray reference for example).
4. Set the aperture, ISO, Frame rate (fps), and shutter so that the level shown on the spot meter
is 0.0STOP.
* See 2-5-1. Assigning functions (P.18) how to assign functions to USER buttons.
* ZEBRA patterning is not available while in V-Log mode.
To Next Page
Loading...
