- 93 -
≥ You can also enable/disable Variable Frame Rate Mode or change the frame rate using the
menu.
j [VFR MODE] (l 131)
j [FRAME RATE] (l 131)
≥ Variable Frame Rate Mode is set to [OFF] in following cases:
j When the [REC MODE] or [REC FORMAT] setting is changed to a setting that does not
support Variable Frame Rate Mode
j When the [REC FORMAT] setting is changed to a setting with a different frame rate
≥ This function is not available in the following cases:
j When you set [OUTPUT BITS] to [4:2:2(10bit)]
j When [2 SLOTS FUNC.] is set to [DUAL CODEC] (l 159)
≥ The following functions are canceled:
j Flash band compensation (l 86, 140)
j Relay recording (l 159)
j Background recording (l 160)
j Interval Recording (l 162)
j PRE-REC (l 86, 163)
j Hybrid Optical Image Stabilizer (l 42)
j Area Mode (l 82)
j Focus Transition (l 52)
j Digital Zoom (l 79)
j Infrared Recording mode (l 84, 164)
j Custom AF function (l 46)
j i.Zoom (l 41)
≥ [BLACK FADE] and [WHITE FADE] are disabled. (l 78)
≥ S
t
ill picture recording cannot be used.
≥ Even if you press the recording start/stop button as soon as recording has started, it may take
some time until the recording stops.
≥ The screen may momentarily black out when the frame rate is changed in Step 2.
≥ The maximum continuous recordable time for one scene in Variable Frame Rate Mode varies
depending on the set frame rate. Recording stops when a certain time has elapsed since the start
of the recording, and restarts automatically a few seconds later.
j When recording in slow motion: 10 hours
j When recording with the same frame rate as the frame rate in [REC FORMAT]: 10 hours
j When recording in quick motion, the recordable time becomes shorter than 10 hours
depending on the ratio between the frame rate for [REC FORMAT] and variable frame rate
setting.
Example: When [REC FORMAT] is set to [FHD 1080/59.94p 50M]
≥ “h” is an abbreviation for hour.
Variable frame rate setting
Maximum continuous recordable time for
one scene
2fps
10 h
60 fps
120fps 5h
To Next Page
Loading...
