EasyManua.ls Logo

Panasonic AW-HE130W - Operating Precautions; Color Bars

Panasonic AW-HE130W
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shoot under the proper lighting conditions.
Toproducepictureswitheye-pleasingcolors,shootunderthe
properlightingconditions.
Thepicturesmaynotappearwiththeirpropercolorswhenshooting
underfluorescentlights.Selecttheproperlightingasrequired.
To ensure a stable performance in the long
term
Usingtheunitforprolongedperiodsinlocationswherethe
temperatureandhumiditylevelsarehighwillcauseitspartsto
deteriorate,resultinginareductionofitsservicelife.
(Recommendedtemperature:Max.35°C[95°F])
Ensurethatacoolingunitorheatingunitwillnotblowanyair
directlytowardtheinstallationlocation.
Do not point the camera at
strong lights.
WhenpartsoftheMOSsensorare
exposedtospotlightsorotherstrong
lights,blooming(aphenomenonwhere
theedgesofstronglightsbecome
blurred)mayoccur.
Bright subject
Blooming
What happens with high-brightness subjects
Flaremayoccurifanextremelybrightlightsourceispointedat
thelens.Inacaselikethis,changetheangleortakesomeother
remedialaction.
When using the automatic functions
• Theinitialsettingshavebeensettoautoforsomeoftheitems
ofthescenesonthecameramenusandothermenus,makingit
impossiblefortheseitemstobeoperatedmanually.Tooperate
themmanually,switchfromtheautosettingstothemanual
settingsasrequired.
• WhenusingtheATW(autotrackingwhiteadjustment)function
underfluorescentlights,thewhitebalancemayvary.
• Insomesituations,itmaybehardtofocusattheautosetting.In
caseslikethis,selectthemanualsetting,andfocusmanually.
Zooming and focusing
Whenthefocusissetmanually,out-of-focusingmayoccurduring
zooming.
Afterzooming,ifnecessary,eitheradjustthefocusorsetthefocus
toauto.
Whenusingthefocusatthemanualsetting,proceedwithzooming
aftersettingthefocuspositionattheTeleendwherethefocusing
accuracyishigher.(However,ifthedistancefromtheunittothe
subjectislessthan1.5meters[4.92ft],thesubjectmayshiftoutof
focusattheWideend.)
IfzoomingisperformedtotheTeleendafterhavingadjustedthe
focusattheWideend,out-of-focusingmayoccur.
Operation of the lens when the power is turned
on
Whentheunit’spoweristurnedon,thezoom,focusandirisare
adjustedautomatically.
The unit comes with the safe mode.
Thesafemodeisfunctiondesignedtoprotecttheunitfromdamage.
Forfurtherdetails,referto“Concerningthesafemode”(→page112).
Operating temperature range
Avoidusingtheunitincoldlocationswherethetemperaturedrops
below0°C(32°F)orhotlocationswherethetemperaturerises
above40°C(104°F)sincethesetemperaturesdowngradethe
picturequalityandadverselyaffecttheinternalparts.
Concerning the VIDEO OUT signal
TheVIDEOOUTsignalisprovidedincasetheimagesaretobe
monitored.
Concerning the HDMI interface standard
ThisunithasbeencertifiedasHDMI-compatible,butonrare
occasionsimagesmaynotbedisplayeddependingontheHDMI
devicewhichhasbeenconnectedtotheunit.
Color bars
• Colorbarsareusedtoadjustthecolorphase,andthewidthsand
positionsofthesebarsmaydifferfromothermodels.
• ThesettingfortheDownCONV.Modeitemwhencolorbarsare
displayedisfixedat“Squeeze”.
Concerning the IP video frame rates
TheIPvideoframeratemaybeslowerdependingonthenetwork
environment,performanceofyourcomputerormobileterminal,
subjectofthevideo,andaccessvolume.
Concerning PoE+ power supply
TheunitcomplieswiththeIEEE802.3atstandard.Useacompatible
EthernethubandPoE+injectortouseaPoE+powersupply.
FordetailsonrecommendedEthernethubsandPoE+injectors,
consultyourlocaldealer.
Turn off the power before connecting or
disconnecting the cables.
Thisunitisnotequippedwithapowerswitch.
TurnofftheDC12VpowersupplyorPoE+powersupplydevice
beforeconnectingordisconnectingcables.
Handle the unit carefully.
Donotdroptheunitorsubjectittostrongimpactorvibration.
Failuretoobeymaycausetheunittomalfunction.
When the unit is not in use
Turnofftheunit’spowerwhenitisnotinuse.
Whentheunitisnolongergoingtobeused,donotleaveitlying
around,butbeabsolutelysuretodisposeofitproperly.
Do not touch the optical system parts.
Theopticalsystempartsarevitaltotheoperationofthecamera.
Undernocircumstancesmusttheybetouched.
Intheunlikelyeventthattheyhavebecomedusty,removethe
dustbyusingacamerablowerorbywipingthemgentlywithalens
cleaningpaper.
Do not point the camera directly at the sun or a
laser beam no matter whether it is turned on or
not.
Takingimagesofthesun,laserbeams,orotherbrightlylitsubjects
forprolongedperiodsoftimemaydamagetheCCD.
Personal computer used
IfthesameimageisdisplayedforaprolongedperiodonaPC
monitor,themonitormaybedamaged.Useofascreensaveris
recommended.
Concerning the IP address setting
DonotruntheEasyIPSetupSoftwareonamultiplenumberof
personalcomputersforasinglecameraandsettheIPaddressat
thesametime.
Otherwise,youwillbeunabletocompletetheproperprocedureand
settheIPaddresscorrectly.
Do not allow foreign matter to make contact
with the rotating parts.
Failuretoobeymaycausetheunittomalfunction.
Operating precautions
14
15

Table of Contents

Other manuals for Panasonic AW-HE130W

Related product manuals