Panasonic AW-HE130W - Operations On The Ak-Hrp200 Remote Operation Panel

Operations on the AK-HRP200 Remote Operation Panel
GAIN
AUTO
BLACK
SET UP
WHITE
BARS
TEST
VF
POWER
HEAD
POWER
DTL
OFF
SHUTTER
ON
STEP/SYNC
KNEE
OFF
SKINDTLMATRIX5600K
SCENE 4
STORE
SCENE 3
SCENE 2
SCENE/USER FILE
SCENE 1
USER 3
USER 2USER 1
SHIFT
FLARE/PED
CAMERA
No.
DTL
DATA
SET
DISPLAY SELECT
UP
DOWN
SET UP
ND/CC M.GAIN/M.PED SHUTTER
ND
VR LOCK
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
IRIS/M.PED LOCK IRIS M.PED CHARA
MENU
SELECT
TALLY/CALL
ALM OPT
SENSE
PUSH
PREVIEW
EXT
D.EXT
COARSEAUTO
FULL
OPENCLOSE
CLOSE
EXECUTEEXIT SAVE/LOAD
SHIFT
+
UP+DOWN
Selects a camera to be operated.
1.Press<SELECT>forabout2
seconds.
Thecameranumberinthecamera
numberdisplayareablinks.
2.Pressthelit<DATASET>buttons
(<UP>and<DOWN>).
Pressthelit<DATASET>buttons
(<UP>and<DOWN>)toselectthe
cameranumber.
3.Pressthe<SELECT>(camera
selection)button.
 Controloftheselectedcamerais
enabled.
For operating the camera menus.
Whenthe<CHARA/MENU>buttonis
pressedfor2seconds,theselected
cameramenuisdisplayed,overlapping
thecameraoutputimage.Whenitis
pressedfor2secondswhileacamera
menuisdisplayed,themenuisexited.
SELECT:
 Turntomovethecursorupand
downinthecameramenuorto
changesettingvalues.Pressto
movetothenextlevelofamenu
itemortochangeasettingvalueat
thelowestlevel.

Camera menu operation
1. Press and hold the <CHARA/MENU> button on the AK-
HRP200 for about 2 seconds.
TheAW-HE130cameramenuappearsonthemonitor.
2. Turn the <SELECT> dial to select an AW-HE130 camera
menu item or to change a setting value.
Turnthe<SELECT>dialtomovethecursorupanddownorto
changesettingvalues.
Pressthe<SELECT>dialtomovetothenextlevelofamenuitemor
tochangeasettingvalueatthelowestlevel.
3. To exit the camera menu, press and hold the <CHARA/
MENU> for about 2 seconds.
44
Basic operations (continued)
45