Panasonic AW-HE130W - Setting the Remote Control Ids; Setting Procedure

Setting the remote control IDs
Thewirelessremotecontrol(optionalaccessory)iscapableofoperating
uptofourunits.
IDsareusedtosetwhichunitsareselectedwhenthe<CAM1>,
<CAM2>,<CAM3>and<CAM4>buttonsonthewirelessremotecontrol
havebeenpressed.
• Whenoperatingamultiplenumberoftheseunitsusingwireless
remotecontrols,setadifferentremotecontrolIDforeachcontrol.
• Whenusingoneunit,settheremotecontrolIDto“CAM1”unlessthe
settingneedstobechanged.

Setting procedure
OperatetheIRIDswitchontheunitsrearpanel,andselect“CAM1”,
“CAM2”,“CAM3”or“CAM4”astheremotecontrolID.(→page19)
TheIRIDswitchsettings“CAM1”to“CAM4”correspondtothe<CAM1>
to<CAM4>buttonsonthewirelessremotecontrol.
(Thefactorysettingis“CAM1”.)
IR ID switches
<CAM1> to <CAM4> buttons
22
23