Panasonic AW-HE130W - Image Screen

Image screen

IP video settings tab (Video over IP)
TheJPEGimageandH.264imagesettingsaswellasthesettings
relatedtoimagequalityareselectedonthisscreen.
z Initial display settings for “Live” page
SetinitialdisplaysettingsfortheLivescreen.
Stream
SelectthetypeofimagestodisplayintheLivescreen.
Setting value:
H.264(1)
Displayvideos(H.264(1)).
H.264(2)
Displayvideos(H.264(2)).
H.264(3)
Displayvideos(H.264(3)).
H.264(4)
Displayvideos(H.264(4)).
JPEG(1) Displaystillimages(JPEG(1))
JPEG(2) Displaystillimages(JPEG(2))
JPEG(3) Displaystillimages(JPEG(3))
Factory settings: H264(1)
Refresh interval (JPEG)
SelecttheframerateforJPEGimages.
Setting value:
For 60Hz:
1fps/2fps/3fps/5fps/6fps
*
1
/10fps
*
1
/15fps
*
1
/30fps
*
1
For 50Hz:
1fps/2fps/5fps/10fps
*
1
/12.5fps
*
1
/25fps
*
1

Factory settings: 5fps
*
1
When[H.264transmission]issetto[On],theframeratemaybe
slowerthanthespecifiedvalueinsomecases.
<NOTE>
• Theframeratemaybeslowerdependingonthenetwork
environment,resolution,imagequality,accessvolume,etc.
• Ifimagesarenottransmittedatthespecifiedframerate,lowering
theresolutionorimagequalitymayresultintransmissionscloserto
thespecifiedvalue.
Image quality (JPEG)
WhendisplayingJPEGimagesintheLivescreen,setthequalityof
thefirstimagethatappearstoQuality1orQuality2.
Setting value:
Quality1 Imagequality1
Quality2 Imagequality2
Factory settings: Quality1
z JPEG
Settheresolutionandqualitysettingsfor[JPEG(1)],[JPEG(2)],and
[JPEG(3)].FordetailsonsettingsforH.264images,seepage@@.
Image capture size
Selecttheresolutionoftheimagestobedisplayedwhendisplaying
JPEGimages.
Setting value:
JPEG(1):
1920x1080/1280x720/640x360/320x180/160x90
JPEG(2):
1280x720/640x360/320x180/160x90
JPEG(3):
640x360/320x180/160x90
Factory settings:
JPEG(1):1920×1080
JPEG(2):640×360
JPEG(3):320×180
Image quality
SpecifytheJPEGimagequality(2types)foreachresolution.
Setting value:
0Superfine/1Fine/2/3/4/5Normal/6/7/8/9Low
Factory settings:
Imagequality1:5Normal
Imagequality2:8
z H.264(1) • H.264(2) • H.264(3) • H.264(4)
Specifythe[Maxbitrate(perclient)],[Imagecapturesize],[Image
quality],andothersettingsforH.264images.
FordetailsonsettingtheJPEGimages,refertopage@@.
H.264 transmission
WhethertotransmittheH.264imagesissethereusingOnorOff.
Setting value:
On H.264imagesaretransmitted.
Off H.264imagesarenottransmitted.
Factory settings: On
<NOTE>
• When“On”hasbeenselectedasthe[H.264transmission]setting,
bothH.264imagesandJPEGimagescanbedisplayedonthelive
screen.
• When“On”hasbeenselectedasthe[H.264transmission]setting,
theimagerefreshintervalmaybecomeslower.
72
73
Web screen configurations (continued)