Panasonic AW-HE130W - Selecting the Units

Uptofourunitscanbeoperatedusingonewirelessremotecontrol.
Uptofiveunitscanbeoperatedusingonecontroller.
Selecttheunit(orunits)tobeoperatedfromthewirelessremotecontrol
orcontroller.
Evenwhenusingonlyoneunit,itmuststillbeselected.
When performing operations from a wireless
remote control
Toselecttheunitusingthewirelessremotecontrol,theIRIDswitches
ontheunit’sbackpanelmustbeset.
FordetailsoftheIRIDswitchsettings,refertopages@@,page@@.
1. Press the <CAM1>, <CAM2>, <CAM3>, or <CAM4>
button.
Theunit’sstatusdisplaylampblinksgreenwhenasignalmatchedby
theremotecontrolIDhasbeenreceived,anditblinksorangewhena
signalthatisnotmatchedbytheremotecontrolIDhasbeenreceived.
When performing operations from a controller
When using a AW-RP50, AW-RP120, or AK-HRP200
Refertotheoperatinginstructionsforthecontroller.
Selecting the units
26
27