Panasonic AW-HE130W - Network Settings; Installing The Software; Use The Easy Ip Setup Software To Establish The Units Settings

Network settings
Installing the software
Beabsolutelysuretoreadthroughthe“Readme.txt”ontheCD-ROM
suppliedwiththeunitfirstbeforeattemptingtoinstallthesoftware.

Software provided on the CD-ROM
z Easy IP Setup Software (EasyIPSetup.exe)
This software establishes the unit’s network settings.Fordetails,
refertothesectionsthatfollow.
Use the Easy IP Setup Software to establish the
unit’s settings
Thesettingsrelatedtotheunit’snetworkcanbeestablishedusingthe
EasyIPSetupSoftwaresupplied.
Toestablishthesettingsforamultiplenumberofunits,thesettingsmust
beselectedforeachcamerainvolved.
IfthesettingscannotbeestablishedusingtheEasyIPSetupSoftware,
selectthesettingsseparatelyfortheunitandpersonalcomputeronthe
networkpageofthesettingmenu.(→page@@)
<NOTE>
• If,afterthenetworksettingshavebeenestablished,anotherdevicein
thesamenetworkhasthesameIPaddress,thenetworkoperations
willnotbeperformedproperly.
SettheIPaddressinsuchawaythatitdoesnotduplicateanexisting
IPaddress.
• DonotestablishnetworksettingsfromamultiplenumberofEasyIP
SetupSoftwareprogramsatthesametimeforasinglecamera.
Similarly,donotperformthe“AutoIPsetting”operationofthe
AW-RP50remotecameracontrolleratthesametime.
TheIPaddresssettingsmaynolongerberecognizedasaresult.
• TheEasyIPSetupSoftwareisdesignedinsuchawaythatwhen
around20ormoreminuteshavepassedafterthepowerwasturned
on,theMACaddressandIPaddressofthetargetcamerawillno
longerbedisplayed.
→Fordetailsofthedisplaytimesetting,referto“EasyIPSetup
accommodateperiod”(→page@@).
• TheEasyIPSetupSoftwarecannotbeusedfromadifferentsubnet
viaarouter.
• Theunitcannotbedisplayedoritssettingsestablishedusinganolder
versionoftheEasyIPSetupSoftware(Ver.2.xx).
1. Start the Easy IP Setup Software.
2. Click the [Search] button.
3. Click the MAC address/IPv4 address of the camera to be
set, and click the [Network Settings] button.
<NOTE>
• WhenaDHCPserverisbeingused,theIPaddressallocatedtothe
unitcanbecheckedbyclickingthe[Search]buttonoftheEasyIP
SetupSoftware.
• IfthesameIPaddressisusedforanyadditionalcameras,the
numbersoftheadditionalcameraswillbedisplayedinthe“IPv4
overlap”columnofthecamerasconcerned.
• Whenthe[AccessCamera]buttonisclicked,theLivescreenofthe
selectedcameraisdisplayed.
• ThisunitdoesnotsupportanIPv4/IPv6switchingfunction.
4. Input the network items, and click the [Save] button.
<NOTE>
• WhenaDHCPserverisbeingused,“DNS”oftheEasyIPSetup
Softwarecanbesetto“Auto”.
• Afterthe[Save]buttonisclicked,ittakesabout2minutesforthe
settingsintheunittobecompleted.IftheACadaptororLANcableis
disconnectedbeforethesettingsarecompleted,thesettingswillbe
canceled.Inthiscase,repeatthestepstoestablishthesettings.
• Whenafirewall(includingsoftware)hasbeenintroduced,enable
accesstoalltheUDPports.
24
25