Panasonic AW-HE130W - Web Screen Configurations; Logging Into The Setup Screen; Web Setup Screen (Setup)

Web screen configurations
Logging into the Setup screen
1. Click the [Setup] button. (→ page @@)
Theloginscreenappears.
2. Enter the user name and password.
Thedefaultsettingsfortheusernameandpasswordareasfollows.
User name admin
Password 12345
3. Click the [OK] button.
Click[OK]againwhenthefollowingscreenappears.
<NOTE>
• Whiletheinitialsettingsremainusedfortheusernameand
password,amessagepromptingtheusertochangetheusername
andpasswordisdisplayedafterauthorization.Inordertoensure
security,thepasswordfortheusernameof“admin”mustbe
changedwithoutfail.
Itisalsorecommendedthatthepasswordbechangedatregular
intervals.
Web setup screen (Setup)
Thesettingsfortheunitareselectedonthisscreen.
<NOTE>
• Thesettingmenuoperationscanbeperformedonlybyuserswhoseaccesslevelis“1.Administrator”.
Fortheprocedureusedtosettheaccesslevel,refertopage@@.
1
3
5
2
4
6
7
8
9
1.
Basic button
WhentheBasicbuttonispressed,theBasicscreenisdisplayedin
themainarea.
→“Basicscreen”(→page@@)
2. Image button
WhentheImagebuttonispressed,theImagescreenisdisplayedin
themainarea.
→“Imagescreen”(→page@@)
3. Multi-Screen button (Multi-Screen)
WhentheImagebuttonispressed,theMulti-Screensetupscreenis
displayedinthemainarea.
→“Multi-Screensetupscreen”(→page@@)
4. User mng. button
WhentheUsermng.buttonispressed,theUsermng.screenis
displayedinthemainarea.
→“Usermng.screen”(→page@@)
5. Network button
WhentheNetworkbuttonispressed,theNetworksetupscreenis
displayedinthemainarea.
→“Networksetupscreen”(→page@@)
6. Maintenance button
WhentheMaintenancebuttonispressed,theMaintenancescreenis
displayedinthemainarea.
→“Maintenancescreen”(→page@@)
70
71