148
18.1.14 Removing the Drive Motor of the Vertical and Horizontal Direction Louver (right
side)
1 Perform “18.1.1 Removing the Front Panel”.
2 Perform “18.1.2 Removing the Air Filters”.
3 Perform “18.1.3 Removing the Front Grille (Right) and Front Grille (Left)”.
4 Perform “18.1.4 Removing the Control Board (Electronic Controller)”.
5 Perform “18.1.8 Removing the Indicator, Receiver & Human Sensor Control Board to below side”.
6 Perform “18.1.9 Removing the Indicator, Receiver & Human Sensor Control Board from unit”.
7 Perform “18.1.10 Removing the Electronic Controller Box and Bracket”.
8 Perform “18.1.11 Removing the nanoe Controller Box”.
9 Perform “18.1.13 Removing the Front Grille bracket (Frame - Air Filter)”.
10 Remove the fan motor cover.
Fan motor cover
11 Remove the screws (2 pieces) from the drive motor complete and remove it from discharge grille.
Screw
To Next Page
Loading...
