8.7. FAN OPERATION
This operation is to enable the fan operation without compressor running. Timer operation is valid for fan operation.
8.8. AUTOMATIC OPERATION
When the Automatic mode is selected, the operation mode is decided in accordance to remote control setting temperature, intake
air temperature and outdoor air temperature.
·
During judging the operation mode, indoor fan is running at Lo-speed and outdoor fan at ON in order to sense the indoor intake
air temperature and outdoor air temperature for 20 seconds. At this time, Power LED is blinking. After the operation mode is
selected, Power LED light up.
There are 4 determination charts when automatic mode is selected.
25
CS-MVG103KE / CU-MVG153KE
To Next Page
Loading...
