- 19 -- 19 -
1. Introduction - Names of Parts
■
Back
26
33
37
27
28
29
30
34
35
36
38
39
31
25 Rear tally lamp ( 248 / Lamp / Indicator Display)
●
This works the same as the front tally lamp. You can set whether to make the lamp light at the menu screen separately
from the front tally lamp. ( 192 / [Tally Lamp])
26 AUDIO terminal cover
27 [MIC] terminal (
140 / External Microphones (Optional))
●
This connects the external microphone.
28 Headphone terminal (
144 / Headphones)
●
This connects the headphones for the audio monitor.
29 [LAN] terminal
●
Supplying power from a PoE+ power supply. ( 22 / Supplying power from a PoE+ power supply)
●
You can control the camera remotely by connecting with a PC that has the “LUMIX Tether” software installed. ( 207 /
Tethered Recording)
●
You can remotely operate the camera by connecting it with a LAN cable to the wireless access point to which the
smartphone that has the “LUMIX Tether” software installed is connected to. ( 223 / Connecting to a Smartphone
(Wired LAN connection))
30 Security Slot
●
Attaching anti-theft equipment can prevent theft. We are not liable for damages that may occur resulting from theft.
31 Battery attachment part
32 Battery release button
33 BNC terminal cover
34 [SDI OUT] terminal (
27 / Connecting the external monitor)
●
This connects external monitors etc. and outputs an SDI signal.
35 [TC IN/OUT] terminal (
64 / Synchronizing the Time Code with an External Device)
●
This connects with an external device and inputs/outputs a time code.
36 [GENLOCK IN] terminal (
67 / Genlock settings)
●
This connects with an external device and inputs a sync signal.
37 HDMI terminal cover
38 [USB] terminal
●
You can control the camera remotely by connecting with a PC that has the “LUMIX Tether” software installed. ( 207 /
Tethered Recording)
●
Import shooting data by connecting with a PC. ( 146 / Importing Images to a PC)
39 [HDMI] terminal (Type A) (
27 / Connecting the external monitor)
●
This connects with an external monitor etc. and outputs a video signal.
To Next Page
Loading...
