Panasonic DC-BGH1

- 20 -- 20 -
1. Introduction - Names of Parts
■
Right side
■
Left side
41
49
44
43
42
50
51
45
46
47
48
4019
52
19
40 Fan outlet
●
The fan outlet for the cooling fan. Do not block it when using this camera.
41 REMOTE terminal cover
●
Keep the REMOTE terminal cover out of reach of children to prevent swallowing.
42 [REMOTE] terminal (
145 / Using a remote control unit)
●
You can control a part of the function remotely by connecting the remote control unit (commercially available) to the
camera. (A Panasonic shutter remote control (DMW-RS2) cannot be used.)
43 Card door release lever
44 Card door
45 Card slot 1 (
30 / Inserting Cards (Optional))
46 Card access light 1
47 Card slot 2 (
30 / Inserting Cards (Optional))
48 Card access light 2
49 DC IN terminal cover
●
Keep the DC IN terminal cover out of reach of children to prevent swallowing.
50 [DC IN 12 V] terminal (
21 / Supplying power with an AC adaptor)
51 Cable lock band attachment part (
28 / Attaching the Cable Lock Band)
52 Fan Inlet
●
The fan inlet for the cooling fan. Do not block it when using this camera.
●
The terminal cover is attached to the camera upon purchase. You can remove the terminal cover from the camera.
●
When connecting a BNC cable to the [GENLOCK IN] terminal or [TC IN/OUT] terminal, use one that is less than 2.8 m
(9.1 feet).
It is recommended to use a double shielded BNC cable equivalent to 5C-FB.