- 233 -- 233 -
12. Remote Operations - Wi-Fi Connections
Connecting by Manual Input
●
Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using.
In the screen in Step of “[From List]”, select [Manual Input].
Enter the SSID of the wireless access point you are connecting to, and then select [Set].
●
For information on how to enter characters ( 203 / Entering Characters)
Select the network authentication.
[WPA2-PSK]
Supported encryption: [TKIP], [AES]
[WPA2/WPA-PSK]
[No Encryption] ―
(When other than [No Encryption] is selected)
Enter the encryption key and then select [Set].
To Next Page
Loading...
