Watching broadcasts
VQT3C84
27
This unit temporarily saves a live TV programme you are
watching with this unit’s tuner on HDD and you can use the
following functions.
Select the HDD drive to perform these functions correctly.
1 While watching TV
(REWIND]LIVE]TV)
Press [SLOW/SEARCH 6] to rewind.
≥“REWIND LIVE TV” appears on the unit’s display.
(PAUSE]LIVE]TV)
Press [PAUSE ;] to pause.
≥“PAUSE LIVE TV” appears on the unit’s display.
2 When you want to resume
Press [PLAY/a1.3 1].
≥You can perform search or Quick View, etc.
≥If temporary save stops (> right), playback will be
performed by that point.
∫ While pausing or rewinding a broadcast:
Press [STATUS ].
≥Press [STATUS ] again.
1 The time that you can rewind the live programme.
2 The amount of time temporarily saved on HDD
(maximum: 1.5 hours).
3 The time of the current playback position.
4 The time which is 1.5 hours after PAUSE LIVE TV or
REWIND LIVE TV started.
≥After 1.5 hours from PAUSE LIVE TV or REWIND LIVE
TV started, current time is displayed.
To stop REWIND LIVE TV or PAUSE LIVE TV
1Press [STOP∫].
2 Select “Yes”, then press [OK].
To hide the display information
Press [EXIT].
≥ Temporary save stops in the following cases:
– When switching to other channels or other screen
– When recording of the watching programme is started
– When 2 programmes simultaneous recording is started
– When performing PAUSE LIVE TV or REWIND LIVE TV for more than
8 hours (This may vary depending on the HDD free space.)
≥ These functions do not work in the following cases:
– When the clock is not set
– While recording 2 programmes simultaneously
– While copying
– While watching a programme being recorded
– When a radio programme is selected
– (REWIND]LIVE]TV) When “REWIND LIVE TV” is set to “Off” (> 77)
≥ (PAUSE]LIVE]TV) You can operate this unit with the TV remote control by
using VIERA Link (> 68).
Refer to the TV operating instructions for operation.
REWIND LIVE TV/PAUSE LIVE
TV
∫ REWIND LIVE TV
You can rewind live TV programme up to 1.5 hours
before as long as temporary save has not been stopped.
∫ PAUSE LIVE TV
You can pause live TV programme and restart watching
from the paused position.
≥Control Panel
Control Panel is displayed
once the playback starts.
Operation can be performed
with [3, 4, 2, 1], [OK]
and [EXIT].
If the Control Panel is not
displayed.
1 Press [OPTION].
2 Select “Control Panel”,
then press [OK].
To hide the Control Panel
Press [RETURN ].
Pause
8:05 AM 9:35 AM
8:10 AM
Exit
Display information
Pause
8:05 AM 9:35 AM
8:50 AM
6:53:12 AM 01.01.2011
Play
6:53:50 AM
DMRPWT500GL_eng.book 27 ページ ２０１１年２月１７日 木曜日 午後１時１７分
To Next Page
Loading...
Need help?
General
